Three Birds - Next Steps

Most steps of preparation I could do while all the pieces were still flat. The tails got an extra layer of fabric that serves two purposes: inside the back it creates a pocket to hold the ends of the tail wire; outside it reinforces the underside of the temporary tail form. On the underside of the breast piece I sewed a patch and cut a slit which will be the pocket for the leg wires. I attached the second side of the head for the cardinal and wagtail and the temporary wing forms for the robin. 

Next I cut the holes for the eyes and sewed eyelets of the right size and colour. The method is adapted from the shisha embroidery technique used to apply tiny mirrors to fabric.

I added three rows of holding stitches. The row in wool on the head and down the back in the colours of the weaving will remain in place. The temporary row down each side will be taken out once I have woven down that far. By then the woven fabric itself will hold the warp threads in position on the rounded form.

Next came the fun of attaching the beak and eye beads and assembling the head. The robin and wagtail went smoothly. I suddenly realized I needed a new method for the cardinal's head because of his crest. I need smooth weaving that ends at the back of the head in fluffy tufted/fringed wool. From the pattern I made a form of just the top of the head, warped it and experimented with how the weaving will work (using a plentiful colour, not my newly purchased cardinal red). The first one failed and I threw it away. The next one I wove and unpicked twice before getting the technique right. There will be further experiments to figure out how to brush and trim the crest to shape (and maybe it will need some pva "hair gel"?), but I learned enough to determine that the shape of the head is correct and to develop a method that works to join the pieces and add the holding stitches.

I love this stage. With their eyes inserted and the 3D heads they have begun to look more like birds. They sit there on the table watching me with their bright eyes. My anticipation of the fun of weaving the colours of their feathers spurs me on to finish assembling and warping the forms.

Three Birds at Once

I'm beginning an experiment to see if making birds in batches will be more efficient. It will mean I can set up once for each short step and move more than one project on to the next level in one go. I began by digging in my bird making files for the patterns and reference for an English robin, a pied wagtail and a cardinal. 

Then I searched through my stash of coloured spun wool and ready-to-spin wool. That was good timing, just before Woolfest last weekend. What fun! I visited Norwegian Wool and selected from their amazing range of coloured wool to fill in the gaps in my stash.

The first step in making the weaving forms was to trace the detailed patterns onto lightweight fusible interfacing. I've colour coded the different marks I need: green for warp lines; black for cutting lines and matching dots; red for darts; blue for edges of coloured areas; and highlighter to fill some coloured areas. (I learned not to use fine liners for this as the ink gradually bleeds and all the detail disappears. Ballpoint pens/biros provide the permanent fine lines I need.)

I dug through my beak fabrics and selected rich red satin for the cardinal and fine black silk for the wagtail. I created a medium grey by colouring some light silk with a black Inktense pencil for the robin. The process of sewing the beaks didn't take long. I pulled out a pair of black beads the right size for each bird: 14.5mm (cardinal), 9.5mm (robin) and 7.5mm (wagtail). This collection of beads has been supplied mostly by my daughters who look in charity shops for necklaces for me.

Next I fused the traced patterns onto heavy interfacing and cut out the pieces. I pinned the first pieces together for the first stage of assembly. 

Quicker prototypes

Prototype of a pied wagtail,
markings drawn on before sewing

Over the last while I have devised a quick and reliable way to test my bird shapes. I make a prototype in fabric, either drawing the markings on plain fabric or foundation piecing them before sewing by machine. The eye beads are added inside before stuffing and the beak is sewn on afterwards. 

Pied wagtail weaving form with weaving started

Once I know the design is right, I use the shapes to make a weaving form pattern with all the construction marks and feather markings. I trace all this onto thin fusible interfacing which I fuse onto the heavy interfacing and begin construction.

Finished pied wagtail

Sparrow pattern used for Christmas gifts

As a side benefit, the patchwork birds are lovely things in themselves and make good gifts. I usually make a batch of at least 4 for efficiency.

Finishing the latest sparrow

I wove the sparrow's breast up to the opening where the legs are inserted, weaving from the outside edge to the centre line. This wool is very springy and tends to spread out. So before I wove from the other side to close the gap I temporarily whip stitched the woven edge with a contrasting thread to hold it in place. This gave me a firm border to weave up to. 

I inserted the finished legs into the pocket and wove between them.

I chose a suitable piece of driftwood for the base and drilled two small holes straight down to hold the leg wires. All that was needed was to adjust the toes a little bit to look natural.

More weaving and a jig for sparrow legs

The whole weaving form showing the tail section
 and green holding stitches still in place

The tail section of the weaving form is temporary and has the warp attached by holding stitches on the underside. There is a row of holding stitches along each side of the body that keep the warp threads in position on the curved surface.

I finished weaving the tail and removed the holding stitches and snipped off that part of the weaving form. Next I will insert the ends of the tail wire into the pocket along the back of the bird and attache the wire to the edge of the woven tail with more wool of the same colour. Once I had woven down the sides as far as the green stitches I was able to remove these stitches. The new woven fabric is now holding the warp threads in the correct position.  

Meanwhile I have been making sparrows' legs with my new jig. I wrap the leg wires onto the jig, position extra lengths of wire for toes, hold them with temporary clips so that I can wrap the permanent wire around the ankles. Once the legs are off the jig, I bend the four toes outward. Thin strips of white florists' tape hold the toes in position and build up the thickened knobbly shapes of the toes and legs. I bend the claws down and clip them to the right length and finally paint the legs with acrylic paint. The wire extending downwards from the bottom of the feet will be what holds the bird onto its wooden perch. The triangle of wire at the top of the legs will be inserted into the specially made pocket on the underside of the bird and be held in place by the weaving.

Warping and beginning to weave the sparrow

After the whole form has been assembled, I begin to add the warp threads. On the head I stitch the warp threads into the buttonhole stitches around the eyes and beak. 

Once the warp is all in place, I begin to weave at the top of the head, stitching the wool into the stitches around the eyes and beak.

I use the coloured markings as a guide for the placing the coloured wool as I work along the back and wings.

Four sparrows later ...

Sparrow number four completed

Over the last few months I have evolved the processes for building my tapestry birds. Now the eyes and beak are integral to the weaving form. Pockets for inserting the tail wire and the legs are included as the form is built. The shape of the bird is much closer to what I want and I have figured out how to do the final weaving with no seams at all.

The pieces of sparrow number five ready to assemble

I realized two basic principles for building the weaving form. One, put the seams in places away from the most detailed parts. Two, work on as much of the detail as possible while the pieces are still flat. The form is made of four pieces of heavy interfacing. Two of these form the head. Another folds around to form the back, tail and sides and the last is the under side of the bird. Once the pieces are all marked and cut out, I start by adding the details to the pieces: beak covering, eye stitches and beads, holding stitches for the warp, darts, and pockets for the legs and tail wires. 

Sparrow number five taking shape

A tiny square of fine dyed silk covers each beak section. I use a row of buttonhole stitches where the beak meets the head and fold the extra fabric to the inside of the beak. More buttonhole stitches applied using a shisha method (an embroidery method used for fastening little round mirrors onto the surface of cloth) fit snugly over the eye bead. Once the details are done, I begin to assemble and stuff the bird starting with the head. 

This is as far as I have got on sparrow number five. As soon as it is completely assembled, I can string the warp threads and then begin weaving.